Magnifier Lamp Desk Swivel Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount I made to mount a magnifying lamp on my desk. The clamp that came with the lamp wasn't gripping enough.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A mount I made to mount a magnifying lamp on my desk. The clamp that came with the lamp wasn't gripping enough. I made this that I could bolt/screw onto the desk. No supports needed. I used PLA but PETG is probably better for this application. I don't remember the settings I used to print this, but considering the force that is on it, I would use at least 3mm perimeters (top, bottom, and sides). Infill maybe at least 25%. Otoh, I might have printed it with 100% infill. It was a few years ago. It's been holding up great. No problems at all.