Creality K1 Max XY Linear Rails - Trigger Extruder and Cartographer *UNTESTED*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added mounting points for a Cartographer Probe and modified extruder space for Trigger/Libra/Cyclops extruders
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have NOT tested this to see if everything works properly yet! I included the STEP file in case anyone is way smarter than me in this regard and can correct any mistakes I've yet to realize.
I have been working on getting all the parts of this printed out, and printed out the toolhead to realize that my Cyclops/Libra/Trigger extruder doesn't fit due to the triangular braces. I cut them down a bit so they should hopefully provide enough support to the rest of the model.
I also want to include my Cartographer 3D probe, so I took some quick measurements off the stock toolhead and mocked them up as best I could on the same design. I already have the bracket from @BootyCall Jones so I wanted to keep that going. In adding these, I had to fill in the cable channel (at least I'm assuming that's what it was).
Please provide any feedback, I am very much an amateur at 3D design and probably do a lot of things wrong. I know enough to be dangerous :/