1 / 5
Sunlu Luftfilterhalter für QIDI Q1 Pro hinten — zdjęcie 1
1 / 5

Sunlu Luftfilterhalter für QIDI Q1 Pro hinten

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sichere Befestigung eines Sunlu Luftfilters im QIDI Q1 Pro.

Ocena
0 / 5
Polubienia
4
Pobrania
29
Wydruki
0
Wyświetlenia
701
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dieser Halter wird im Drucker hinten rechts auf den Metallrahmen aufgesteckt. Er ist für den Sunlu Luftfilter gedacht, der stabil im Käfig sitzt.

Die Befestigung hat eine doppelte Sicherung: Sie rastet im Metallrahmen ein und in der kleinen Bohrung im Rahmen, die sich da hinten befindet.

Die Montage benötigt etwas Kraft beim Anbringen, sitzt dann aber bombenfest. Man muss nur auf das Kabel vom Temperatursensor (?) aufpassen, das kann man etwas hervorziehen.

Druckbett und Druckkopf haben ausreichend Platz. Der Filter samt Halter können problemlos entfernt werden.

Bis auf die Verstärkungsstreben komplett ohne Support druckbar. Den Halter seitlich auf dem Druckbett ausrichten, so dass die Stütze auf dem Druckbett aufliegt.

-----------------------------------

This holder is attached to the metal frame at the rear right of the printer. It is intended for the Sunlu air filter, which sits securely in the cage.

The attachment has a double locking mechanism: it snaps into the metal frame and into the small hole in the frame at the back.

The mounting requires a little force when attaching, but then sits bombproof. You just have to watch out for the cable from the temperature sensor (?), which can be pulled out a little.

The print bed and print head have sufficient space. The filter and holder can be easily removed.

Apart from the reinforcement struts, it can be printed completely without support. Align the holder laterally on the print bed so that the support rests on the print bed.

 

Print Settings

Printer: QIDI Q1 Pro

Rafts: No

Supports: Tree (nur unter den zwei Verstrebungen manuell aufgemalt)

Nozzle: 0,4

Resolution: 0.2

Walls: 3

Infill: 20

Filament: Sunlu PETG Green

Tagi