20g Laptop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laptop stand around 20g of filament
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
I tried several laptop stands for my office but wanted something that could be printed quick, use a minimal amount of filament and still be sturdy enough for my 14" Lenovo laptop I have at home and my Dell 14" I use at work.
Found some models that was designed for tablets and created a new design using them as inspiration.
With a standard 0.6 mm nozzle you can print this in about 47 minutes on a MK3S. If you have a MK4S with a 0.6 mm high flow nozzle you can push this out in around 25 min with the 0.32 mm SPEED settings.
I used 2 perimeters with my MK3S 0.6 mm nozzle. I would probably print this with 3 perimeters on a 0.4mm nozzle.
Feel free to download the model and adjust so that it fits your laptop or tablet.
v2 is a little but more than 20g (around 25g) but more rigid.