AxioT Ejector Rack A705-24U

Summary

This is a stackable rack for the 70.5mm diameter type A container in the AxioT system with ejector buttons per 2U of rack space.

Unit Type

This rack fits the A705 container variant with a unit length of 6mm/U and provides 24U of rack space each.

Dimensions

Length: 152.2mm
Height: 102.5mm (20mm ejector + 76.5mm frame + 6mm cap)
Depth: 73mm (63.5 mm frame, 9.5mm ejector buttons)

Models

Assembly parts are organized in folders by format (STEP and STL). Each format includes all models required to build a complete unit.

A full rack needs 12 Ejectors, 1 Base, 1 Front, 1 Rear, 1 SideL, 1 SideR, 1 Cap, and 8–12 Cleat*. Only one cap is required per vertical stack.

Dovetail cleats are used to tie parts together and may be glued in place if disassembly is not intended. Cleats are provided in 3 configurations:

• Full - used in full-depth cleat slots
• Step - joins cap to sides (may substitute using Full)
• Half - used to plug unused cleat slots (optional)

* Unused cleats may be left empty and full cleats may be used for all required connections

Printing

Material: ABS or PLA optimal
Brim: Outer brim recommended
Supports: None required
Fill: 100% for cleats, ≥20% for sides and ejectors, ≥10% all else
Orientation

• Ejectors: side-face down
• Base: bottom down
• Front: bottom down
• Rear: bottom down
• Sides: outside-face down
• Cap: top down
• Cleats: long-face down