1 / 7
Kaneda (Akira) [Pre-Supported]
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
SzczegółyPliki (17)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane
Printing information
The print comes in two parts. A main bust part, and a base part.
FDM info
No external supports should be required to print this one if you have half-decent cooling
Resin info
For resin printers, Kaneda comes pre-supported (thanks to Charro Zuck!) in three different sizes: 90% for printers like the Elegoo Jupiter, 70% for printers similar to the Elegoo Saturn, and 40% for printers comparable to the Elegoo Mars2.
Here are a few choices for you:
- Lychee Slicer Lite (.lyt) files (what are LYT files?) – These are quite useful since they allow you to adjust the supports according to your preferences before printing. This is the recommended approach.
- Pre-supported and pre-hollowed .stl files. Be careful with these, especially if you’re using anti-aliasing. It can affect the support connections, possibly weakening them and causing print failures.
- If you’re up for some experimentation, the standard STL files are available for you to customize and slice as you like.