Closet/Bypass Door bottom tracks (F3D)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Closet/Bypass door tracks to fit in 1/4"(6mm) groove in the bottom of the door
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
These tracks are so bypass style closet doors have a bottom track that is out of the way. This is accomplished by routing a ¼" (6mm) groove in the bottom of the door and fastening these parts to the ground to track inside of the door. This will prevent the doors from swinging in and out. You need 1/8th (4mm) clearance floor to bottom of door minimum. Groove depth should be jsut over 0.5" (13mm) if possible.
#6-#8 screws should fit the countersinks. I'd suggest #8 for the center catch and #6 for the end catches. The center catch projects into the closet as with my bypass door setup I would need to remove the center catch to be able to remove the doors at all.
The fusion360 files are included here and are somewhat parametric but I did not make the the door size/spacing of the tracks parametric in this file. I might update that but feel free to modify the tracks to suit your needs.
I used 2 end catches and one center catch for my closet door install.