Star Trek: Voyager Large PADD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make the bigger PADD device used on the USS Voyager.
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 357
- Wydruki
- 4
- Wyświetlenia
- 939
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Here's the larger version of the Voyager PADD.
Graphics included are the 2 shown in the diagram. If you want to make your own graphics the dimensions for the outer edges are 156 x 90mm. The main image dimensions within that should be around 143 x 77mm. Find a ton of excellent graphics here: http://www.lcars.org.uk/lcarstemplate.htm?page=lcars.htm
Update Log
December 21 2025 - Fixed the stand base: tightened the holes for the legs as they were too loose before.
October 26 2024 - Added alternate frames as an option.
October 13 2024 - Added a stand and another graphic.
October 8 2024 - Added a swappable display version of the middle layer like the small Voyager PADD.
October 6 2024 - Added the first graphic for the display, same as the one in the profile image.
There is also a version of the top layer without the crescent.
Buy prints of this model:
max3dfactory (German region) - https://www.ebay.de/usr/max3dfactory