1 / 3
Built-in Dish drainer Drip Tray Holder Replacement (L&R)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement drip tray holder for the side of dish racks both left and right verison available. For trays D=219mm, H=15mm
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Dish Rack Drip Tray Holder is a 3D-printable replacement part designed to fit the bottom tray of dish racks. It collects and directs excess water from dishes into the tray, preventing spillage. A durable solution for replacing the original plastic drip tray holder on the side of your dish rack's bottom tray.
Designed for a tray that is 219mm deep and 15mm high
Print Settings:
- Material: PLA, ABS, PETG (PETG recommended for water resistance)
- Infill: >30%
- Layer Height: 0.2 mm
- Recommended min wall thickness: 2mm
- Nozzle Size: 0.4 mm
- Supports: None required
Usage Instructions:
- Print the Drip Tray Holder: Use the recommended print settings for optimal results.
- Remove the Old Holder: Detach the damaged drip tray holder from the side of the dish rack tray. save the rubber filler
- Install the New Holder: Snap on the printed part into place on the side of the tray, dont forget to put back the rubber filler in the inside of the tray
- Use as Normal: It will efficiently collect and direct water into the tray, preventing spills.