Nissan Switch USB AUX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed this to mount a USB and Aux port from my GROM BT3 with the USB and Aux addon kit. This should work with any…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Remixed this to mount a USB and Aux port from my GROM BT3 with the USB and Aux addon kit. This should work with any USB and 3.5mm Aux addon kit.
I couldn't find a USB/AUX switch for a 2005 Nissan Frontier, but I found a ton for Toyota. So I bought this Thing from Amazon:
https://www.amazon.com/gp/product/B06XYK8T3W/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
It has a single mounting screw and can be remounted into this remix. I did notice that the cable on the back of the item I bought from amazon does come off easily you could use some hot glue to glue it in place or I used some Kapton tape. Unfortunately that is how the Toyota piece came and there isn't much I can do about that.
Print Settings
Printer:
Modified CR-10s
Rafts:
No
Yes
Resolution:
0.2mm
50%
Filament: Amazon Basics PETG Black
Notes:
Make sure you use PETG for all automotive stuff as PLA will warp.
Category: Automotive