1 / 4
Scissor holders for Skådis and Brännboll with seperate flush fit connectors — zdjęcie 1
1 / 4

Scissor holders for Skådis and Brännboll with seperate flush fit connectors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two sizes of scissors holders with connectors for both Skådis and Brännboll. The connectors fit flush.

Ocena
4 / 5
Polubienia
17
Pobrania
140
Wydruki
1
Wyświetlenia
572
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked the design of the models these are based on, but I when testing them I felt like the bump the hook created interfered with the action of taking out the scissors. 

These models have a flush fit on the inside of the scissors basket to avoid this issue. 

In addition, there is a connector for the Brännboll shelf (which is a much thinner metal, compared to the thicker wood chip board of the Skådis). 

It's probably a good idea to use a brim when printing the baskets.

Note that these are designed with low clearance for slotting the connectors into the baskets. This is to create a nice push-fit that makes it hard to accidentally knock the basket off the connector. The parameterised F360 project file is included to make adjustments easier.

Tagi