20 sided popsicle dice (D20)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are faces to make a big D20 (icosahedron) out of popsicle sticks.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Make a huge D20 using those faces, popsicle sticks and the hubs from Hub for Popsicle Stick Icosahedron
I've tried many ways of modeling the faces, and ended up with this “springy” version to account for the small differences in popsicle stick sizes, so that the faces don't overlap or bump into each others.
This is for popsicle sticks about 9.5mm wide but should allow for up to 11mm, if your sticks don't fit, you can slightly scale up the model.
To be fair, in the end, the dice is too heavy to roll, but it's fun.
Each model contains the numbers as different parts, you can either use multi material or remove the number part to emboss.
Included an empty face if you want to make your own design