Honda Motocompacto Handlebar Grips!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A couple designs for a new set of handlebar grips if you don't like the light brown pleather.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like the handlebar grips, SO I MADE MY OWN! One with little motos, one with the Honda “wing” logo that looked like it would give some good grip.
These are a little more difficult to print than the other Motocompacto stuff I've posted. You will need to print these from TPU; the ID is too tight for a solid plastic. You should use 3-4 walls and 10-15% infill to give some flex for a comfortable grip. I would even go so far as to print these one-at-a-time to avoid TPU stringing.
You will notice that there is only 1 grip. You will have to MIRROR this single grip along it's axis in your preferred slicer. Not duplicate and rotate. MIRROR. THE. PART. And orient both parts so the lug-profile side is down. TPU does not like support and it strings like an SOB.
I've also included the FreeCAD file of the base grip and the Blender file that I used to map the patterns onto the outside so YOU can make YOUR OWN custom stuff! Be careful; the .blend file and stl files are pretty big because I have no idea WTF I am doing in blender. I'm an engineer, not a sculptor :[