Single Extruder - Dual Color - Chess Board Alternative (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative piece to use in conjunction with the original Chess Board model to obtain a nice chessboard effect.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I discovered that the base model could be used in a different way than intended: If instead of flipping the piece 180°in Y you keep the basic orientation but rotated it 90° in X it can still fit together. However, in this new orientation you obtain an effect of floating dots as their height allows you to distinguish them easier from the baseplate. To improve this effect I have increased the height of the dots in my model which, in conjunction with the base model, gives you an even chessboard.
Printing information:
You need to print this model once and the base model once as well. Afterwards you can simply assemble the two pieces, this model on the bottom rotated 90° and the basemodel above.
All credits go to the original author, since I only really extruded the dots a bit more.