Lion Head 2 colors 1 extruder with wall mount + Test prints - No supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2 colors lion 🦁 head printable with 1 extruder that can be mounted on a wall.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Please give it a 💖 if you like it 🥰
🐼 Check out my panda too 👉 https://www.printables.com/model/1024656-panda-head-2-colors-1-extruder-with-wall-mount-tes
This is a 2 colors lion 🦁 head printable with 1 extruder that can be mounted on a wall. You can print the model without supports.
I also made 2 test print so you can validate that the parts are going to fit before printing the entire model.
I printed mine the a 0,4 mm nozzle and 0,2 mm layer height. For a smoother surface, you can lower the layer height to 0,10 or even 0,05 mm. You can upscale the model but making it smaller may cause fitting issues (try the scaled test print too).
Please give it a 💖 if you like it 🥰