Parameterized stained glass angle soldering jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tucker Moore's system of jigs for soldering stained glass together at different angles, now parameterized!
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a fully parameterized fusion model for soldering together stained glass at different angles. This model should be compatible with angles from 40º to around 155º (but in theory, it should work for any angle between 1º and 179º!)
You'll need two of the connecting rods and two of each angle that you want. Any infill level should be fine, have tested at 10% with PLA. Print the jigs and the rods on their side. If you have issue with the rods fitting, try printing them at slightly below 100% scale (97% worked well for me)
ParametricText plugin is required - https://apps.autodesk.com/FUSION/en/Detail/Index?id=2114937992453312456