1 / 3
Bigfoot Xing Sign, with built in hanger on back
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a Bigfoot Xing sign I was asked to create for a friend. Printed at 100% it is approx 14" across (edge to edge,…
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 196
- Wydruki
- 2
- Wyświetlenia
- 568
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (43)Powiązane
This a Bigfoot Xing sign I was asked to create for a friend. Printed at 100% it is approx 14" across (edge to edge, not corner to corner). I added a cutout on the rear for a nail head to slide in to the sign for hanging.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Doesn't Matter
Supports:
Yes
0.2
Infill:
15
Category: Signs & Logos