Filament Spool Drum Sorter with *click* Interlock Mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple filament spool drum sorter with interlock mechanism. No magnets or other additional mechanical parts needed.
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 261
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a simple filament spool drum sorter with interlock mechanism without magnets or other additional mechanical parts. The latching mechanism is directly added to the tray.
There are files for one, two, three and four bin trays attached.
The half-height variants can be stacked together with means of a 3x40mm steel rod. Therefore the corresponding tray holes have to be drilled out with a 3mm drill bit. Each tray from a different side. If using welding rod instead, no drilling is required. I seems that not all identical looking spool rolls are from the same production line.
Needed parts are:
- 6x M3x10 countersunk screws
- 1x 3x40mm steel rod or 2.3mm welding rod (for half-height trays)
Additional 3mm holes have to be drilled on one side of the filament spool. Sometimes the positions of the holes deviate slightly so you have to drill nearly all holes at the needed positions.
The OpenSCAD file has been attached attached for tweaking things to different spool dimensions.
It's stackable!
https://www.printables.com/model/1025961-stackable-filament-spool-drum-sorter-with-click-in
To be printed in PETG.
Have Fun!