1 / 1
Respirator filter converter - Shigematsu to 3M — zdjęcie 1

Respirator filter converter - Shigematsu to 3M

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use Shigematsu cartridge filter with 3M respirator

Ocena
0 / 5
Polubienia
1
Pobrania
26
Wydruki
0
Wyświetlenia
149
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I have Shigematsu organic filter cartridge.
I have 3M respirator.
Ugh!

Shigematsu filter for 3M respirator with bayonet slot

I have Shigematsu organic filter cartridge.
I have 3M respirator.
Ugh!

Shigematsu filter for 3M respirator with snap slot

Of course you're responsible of what you do with your print. Please check the fit and filter before you use it in any critical situation.

Printing note:

  1. If you use o-ring or don't need the additional emboss on the bayonet side, print with that side on the bed and push it down a little bit
  2. Coat the outer and inner of the print to avoid leaks. I use rubberized coat that is used for water pipe

Usage Tips:

  1. File away some material if it's too tight
  2. Use tape, gasket, rubber, or something to improve the fit if it's too loose
  3. Tight or loose fit depends on your printer
  4. You can put dust filter in front of the cartridge
  5. If it's tight enough, you don't need to put the top on

PS. I've been using this for almost a year now. Only make time to share this file just so I can participate in #NIKKEJINXAdvice event <3 If you like it, or find it useful, don't donate anything to me. Just go play Nikke. It's a good game.

Tagi