Impeller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a 50 mm diameter centrifugal impeller.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
To use it, you will have to create a hole in the model to accommodate the shaft you are using.
It is based on the turbopump impellers of rocket engines.
I recommend you to use the following settings:
Nozzle 0.4mm
Layer height 0.2mm
Supports
3 Wall Lines
3 Top and Bottom Layers
Infill 50%
Approximate printing time: 1:30
Approximate material used: 10g
I would appreciate your feedback to help improve the model.
Follow me on X for more 3D models and updates: https://x.com/SebasDeAce3d
If you enjoy this model and would like to support my work, you can do so via https://paypal.me/SebasDeAce3d or giving it a like!. Any support is greatly appreciated and helps me continue creating new models.Thank you!