Shelly Blue Motion magnetic wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic, adjustable wall mount for the shelly blue motion.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this wall mount because all the existing models didn't meet my requirements.
In addition to the print files you will need (magnetic) 13mm ball bearing spheres. Be careful, most of the spheres you can buy on the internet are stainless (may or may not be magnetic).
Additionally you need round magnets d=15mm, h=3mm with a countersunk 4mm hole in it. The round magnet does two things. First it attaches to the ball an makes the wall mount adjustable. Sencond it holds the back cover to the blue motion, replacing the original back cover. Theirfore the plastic snaps of the original back cover are not required anymore. This is also better, because updating the blue motion requires the button underneath the back cover to be pushed, and this is a real pain as the fit of the original back cover is really tight.
It tilts enough to mount it in a corner (on one wall) or on the ceiling.
The models work with resin and FDM printers. I've tested it with 0,6mm Nozzle and 0,18mm layer height, resin printer at 0,05mm layer height.