Free the cube puzzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remove the central cube from the other geometries.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This puzzle consists of a base and three geometrical parts, with the center piece being a cube. Your goal is to remove the central cube from the other geometries. Perfect for testing your problem-solving skills and patience, this puzzle is great for both adults and children.
Size: approx. 107x26x23mm
For the assembly you will also need:
- super glue
- 2 metal rods (steel, aluminium): diameter 2mm, length 34mm. (You can use steel nails as a base for rods)
Common settings:
- nozzle 0.4mm
- first layer height:0.28mm
- layer height: 0.2mm (you can experiment)
- 3 outer perimeters
- top&bottom solid layers: 3 or 4 (at 0.2mm layer height)
- no brim/raft/supports
- skirt can be used(recommended)
- print speed: based on experience for your printer (default is usually OK, lower it if necessary)
- filament type: PLA(you can try others also)
Part1-base:
- infill: adaptive cubic 25%
Part2-cube:
- infill: adaptive cubic 10%
- print orientation: hole on the bottom/top
Part3&Part4-baseLR:
- left and right piece are equal, therefore you need to print 2 copies of the same part
- infill: adaptive cubic 10%
- print orientation: hole on the bottom/top
Assembly instruction are attached in the zip file.