Dummy 13 600% knee and elbow joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexible knee and elbow joint for the Dummy 13 at 600% scale
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1859
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
I love the Dummy 13 model, and I really appreciated the 600% scale frame parts that Depep1 created, but I found that the knee and elbow joint was too stiff for me to print right, and it would keep cracking when I assembled it. So I made my own specifically for 600% scale.
I changed the knee joint to be thinner to give it more flexibility so the knee joint just pops in place, and hollowed out both the angled curves that nestle in the conical grooves and the overall curves. This gave me more flexibility, but also retained the stiffness I wanted.
I then sliced the model with a fuzzy skin on the angled curve to give more grip, and it worked great!
I went ahead and added inserts for the gaps in the joints if you want to add them, but I leave them out of mine, so they haven't been thoroughly tested for fit. They may still be a bit loose