1 / 7
Pocketcaster - Pocket Fishing Reel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Catch fish from docks and edges of bodies of water with this pocket sized fishing reel.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 1168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (36)Powiązane
Try your luck with the Pocketcaster - a pocket sized fishing reel!
I printed this with 0.2 layer height in PLA on a Bambu Labs X1C printer.
Print everything flat side down, and print the reel spool with the narrower hole up and with supports.
Required Non-printed Parts:
- skateboard bearing, the faster the better
- half of a pen spring
Assembly Instructions:
- Push bearing onto central shaft of lower housing
- Insert Spring into hole on trigger, use the non-cut side
- insert trigger+spring mechanism and use something thin like a pen or tweezers to guide the spring into place between the trigger and the divot in the lower housing
- Insert the handle shaft into the reel spool
- Push the handle clip around the slot in the handle shaft, fixing it in place
- Push the reel spool onto the bearing until it is fully seated
- Snap the housing lid into place
You can optionally print the handle_additional and knob parts, along with an extra clip and attach a larger handle for reeling in with some more power!