Apple Watch Band hanger carousel

Apple Watch Bands Hanger-Carousel

the carousel has space for 50 bands

you also need 2 ball bearings (608zz) so that the carousel turns nicely and does not tilt.

Printing instructions

print in PLA or whatever you like (with ABS or something like that, think of the shrinkage)

print on the large surfaces (the parts should already be correctly oriented)

print with 3 walls, 5 bottom/top layers, 20% gyroid infill and 0,2 layer height

no supports needed

maybe use a variable layer height for a smoother surface at the base (not yet tried)

I printed the axis of the carousel in solid with 100% infill (use a modifier in your slicer)

there is a test piece that you can print first to see if your bands fit nicely

Assembly instructions

Place a ball bearing over the axle of the carousel, then the spacer and then another bearing. (see the photos)

Then carefully insert the whole thing into the base.

If your printer is well adjusted, everything should fit together with very light pressure.

If it is too difficult, you can warm up the base a little and then carefully push erverything together.