Portrait stand for Adafruit eInk Featherwing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your e-ink project in style
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Print with the front of the display flat on the print surface. Mount the featherwing with 4 M2.5 screws & nuts.
The version shown above was sliced with orcaslicer and printed on an MK3s in Prusament Mystic Brown on a hologram build plate with 0.20mm layer heights. The first layer infill was set to Hilbert Curve, and mouse ears were used to improve adhesion. No support is needed.
Design files (FreeCAD) and solids model (STEP) are included. The FreeCAD design files embed a copy of the eInk FeatherWing's PCB outline, which is released under an Open Source Hardware license.
More details on the related Adafruit Playground Note.