1 / 4
PTFE Tube Fitting (PC4-M6) Add-On for Prusa MK4S MK4 MK3.9S MK3.9 Filament Guide — zdjęcie 1
1 / 4

PTFE Tube Fitting (PC4-M6) Add-On for Prusa MK4S MK4 MK3.9S MK3.9 Filament Guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adds a PTFE tube fitting to your existing MK4S/MK4/MK3.9S/MK3.9 filament guide using spare M3 parts!

Ocena
5 / 5
Polubienia
27
Pobrania
158
Wydruki
1
Wyświetlenia
1393
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

A remix of @romankozak's adapter, this add-on part for the MK4-family filament guide provides a threaded attachment point for a PTFE tube fitting/coupling, allowing you to route filament coming from a dry box or other accessories.

Two different configurations are provided, the original for typical fittings, and an updated model for through fittings (where the PTFE tube passes all the way through the fitting). Within these configurations two models are provided, one for hex nuts and one for square nuts. STEP files are also provided, but they may be limiting as it is a remix of a mesh model.

Required Parts

  • PC4-M6 PTFE tube fitting/coupler
    • Sometimes called a “pneumatic push-in fitting”
    • Other M6 fittings for other diameter tubing may also work
  • M3x10 screws (2x)
    • Either button/cap head or socket head
    • Longer screws will also work
  • M3 hex nuts OR thin M3 square nuts (2x)
    • M3n or M3nS in Prusa terminology
    • The thin square nuts are 1.6-1.8mm thick
  • Printed add-on part, chosen based on available fasteners

You likely have spare M3 screws and nuts after printer assembly/in your Prusa spare parts, check there first!

Printing Instructions

Print in the provided orientation. Sequential bridging is used in the design so that no supports are needed.

Assembly

  1. Thread the PC4-M6 fitting into the (printed) add-on part
  2. Insert the M3 nuts into the add-on part
  3. Attach the add-on to the filament guide with M3 screws going through the guide's filament holder openings as shown in the photos
  4. Push your PTFE tube into the PC4-M6 fitting

Changelog

  • Added additional models to support through fittings for end-to-end PTFE contact. This has greatly reduced the friction on the filament in my case.

Tagi