1 / 4
Filament clip for Inland (MicroCenter) filament spools
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a filament clip specially designed for Inland (sold in MicroCenters) 1.75 mm filament (1 kg) spools.
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 701
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a filament clip specially designed for Inland (sold in MicroCenters) 1.75 mm filament (1 kg) spools.
UPDATE: If the spool is very full, the filament tends to stuck into the clip during printing (if you don't remove it). The r2 now has a small chamfer which (hopefully) will prevent that.
Print instructions
Category: 3D Printer Accessories Print Settings
Rafts: No
Supports: No