Beetlejuice 200x200 Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Matte Grass Green Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.6mm) swap to Gray
At layer #15 (1.84mm) swap to BambuLab Green
At layer #16 (1.96mm) swap to Grass Green
At layer #18 (2.2mm) swap to Lemon Yellow
Border Only Colors from here until the end.
At layer #20 (2.44mm) swap to Jade White for the rest.