1 / 2
Monster Truck Wheel Hub – Compatible with Hot Wheels Monster Trucks — zdjęcie 1
1 / 2

Monster Truck Wheel Hub – Compatible with Hot Wheels Monster Trucks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model of a replacement hub compatible with Hot Wheels Monster Truck

Ocena
0 / 5
Polubienia
23
Pobrania
110
Wydruki
0
Wyświetlenia
1381
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Monster Truck Wheel Hub – Compatible with Hot Wheels Monster Trucks

Bring a broken Monster Truck back to life. This is a reinforced replacement wheel hub compatible with Hot Wheels Monster Truck toys — a direct fix for a cracked, stripped, or snapped factory hub that's left a wheel flopping around or fallen off entirely.

The hub has been beefed up with extra reinforcement over the original part, so the repair is stronger than the toy it's fixing. A cheap, satisfying save for a well-loved toy.


✅ Features

  • Replacement hub for Hot Wheels Monster Truck toys

  • Reinforced for extra strength vs. the factory part

  • Saves a broken toy from the bin

  • Quick, low-material print

  • Original design


🖨 Recommended Print Settings

Setting

Value

Material

PETG

Layer Height

0.2 mm

Perimeters/Walls

2

Infill

15% gyroid

Orientation

Print outer face down

Supports

Not required

💡 PETG gives a good balance of strength and a little flex for a toy that takes knocks.


🔧 Installation

  1. Print outer face down, no supports.

  2. Soften the tyre in hot water before fitting it over the new hub — it stretches on far more easily.

  3. Heat the axle and press-fit it into the hub for a secure, lasting join.


🚙 Compatibility

  • Hot Wheels Monster Truck toys (replacement hub)


Fixed a truck for the kids? Post a make — these repairs are the best kind.

Tagi