Arrma Granite 3S BLX Front Shock Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After I destroy my Front shocks on my Arrma Granite second time, I made a protector as I have on my TRAXXAS Slash.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Front Shock Protectors for My Arrma Granite
After destroying the front shocks on my Arrma Granite for the second time, I decided to create protectors similar to the ones I use on my TRAXXAS Slash.
Assembly is quite simple: You only need a longer screw (3x30mm) for the bottom shock mounting.
I printed the protectors using TPU 95A for flexibility and durability. My print settings were a 0.4 mm nozzle and a 0.2 mm layer height.
I used manual supports to prevent the screw hole from getting clogged with support material.
The model has a few small issues, but it printed without problems using Orca Slicer. If anyone can fix the issues, feel free to give it a try! ;-)
New fixed version online.