1 / 1
Miniature Tombstones...or Scale 'em to a Different Size...Whatever
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Several tombstone designs made for a miniature diorama
- Ocena
- 5 / 5
- Polubienia
- 139
- Pobrania
- 679
- Wydruki
- 3
- Wyświetlenia
- 1504
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (188)Powiązane
Just some quick tombstone models I made for a miniature diorama project. These range from 43 to 71mm, but there shouldn't be too much of a problem with scaling them up, or even down (but only a little or you'll lose the details). They are designed to be 2.5 dimensional, so they may not be applicable if your use case is more 3D. I printed these laying on their “backs” and used ironing on the surface, which made them come out pretty smooth-faced. The plan is to do some weathering effects on them, but left them as-printed for this post.