Paracord Cleat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small, quick printing cleat that can be used to tension lines, secure loads or keep your Paracord neatly wrapped.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a Paracord cleat - this quick printing little device easily slips onto your paracord and can aid in tying down loads, tensioning lines, keeping your paracord neatly wound and many other uses.
My goal with this was to have something to help secure Paracord wrapped around some of our duck hunting decoys. Some of higher end robotic decoys don't have a means by which you can secure the decoy line when you put them away.
The cleat is like the mooring cleats on docks for tying up boats. To use, thread the paracord through the holes in the bottom. When it comes time to secure your line, a few turns of the cord around the cleat will secure it nicely. If you've never used a mooring cleat before, this animated guide shows how to do the Cleat Hitch knot - https://www.animatedknots.com/cleat-hitch-knot-dock-line.
You don't need to do anywhere near as many wraps around the cleat as are shown in the link knot instructions.
I printed mine in Hatchbox Grey Blue PETG using the .20mm SPEED and Generic PETG profiles. I used 4 perimeters and solid infill for strength.