Radial Engine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Model Rotary Engine
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 719
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Model Radial Engine it hopefully works, it takes about 1.5kg of filament and 3 days to print so I am still printing parts out but everything is printing and fitting perfectly
Based on the assembly it should work.
It has the option to put a elastic band inside to rotate the pistons and main axle after cranking it and uses a 3:1 gear ratio to help
Except for the optional elastic band there are no other no printed parts
Feel free to ask any questions
You will need to slice this yourself but If I was printing it I would use 0.16mm 10%Gyroid infill and tree supports
If you like the model but don't want to print it a Like would be greatly appreciate it!!