Nexx xcom 2 to Q8 intercom adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Nexx X-Com 2 intercom slot on helmet to mount Q8 (and probably similar designs) intercom.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I made two variants because I didn't like how the straight variant looks on helmet so I made also an angled variant.
With small nipple as a counterpart on intercom for satisfying click and retention.
There is also a pocket for USB cable in case you dismount the intercom. It is maybe to tight to fit against helmet but at least it holds on place.
I also added standalone holder model for Q8 intercom for possible easy remixes for another helmet (or anything else :) ).
Blank cover for helmet is part of original V6 holder.
Designed by hand measuring as precise as possible and tested on Nexx Vilitur helmet and new Q8 Intercom.
Because of small flexible clip I recommend to print it horizontally (as on picture) to avoid snap of it (it is now fortified but you never know).
Printed from PLA or PETG, 0.3mm layer height, 20% infill, be sure that flexible clip is full of perimeters.