1 / 2
Card Case (Compatible with cards 63x 88 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the very cool card deck by kriswillcode to fit 63 x 88 mm playing cards.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the very cool card deck by kriswillcode.
The original was too small for my playing cards (Ellusionist and Bicyle) wich both are 63 x 88 mm sized card decks.
Iv also added a little more clearance, though ITS still a good fit.
For printing I recommend the same settings:
I recommend 3 vertical shells and 5 top/bottom layers. It was
designed around a 0.4mm nozzle and a 0.2mm layer height. With these
print settings, you won't have any infill and the case will be sturdy