1 / 3
Sovol SV08  Belt Helper  for X Carriage — zdjęcie 1
1 / 3

Sovol SV08 Belt Helper for X Carriage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is a simple design to help you install the X carriage by locking and stretching the belts to your needs

Ocena
5 / 5
Polubienia
220
Pobrania
1203
Wydruki
10
Wyświetlenia
5633
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I have added a big version to accommodate for V4 and for Xenomorph with Eddy 

 

You need to orient the part in the slicer

this is a simple idea not only to keep the belts in place and aligned but you can also stretch them to fit your new build like Xenomorph, Spartacus, Shroud V4 or any other toolhead that you want to install in your 3D printer. can be used in any Voron stile gantry 3D printer. 

Print settings
4 walls
35% gyroid  infill
5 top and bottom

BOM
8x M3x4,5 OD 4mm  or longer heat set insert
4x M3x8
4x M3x25 or 30

 

Enjoy!


 

Tagi