Bike basket handle locking device
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a locking mechanism for the handlebar-mounted basket on the bicycle.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a locking mechanism for the handlebar-mounted basket on the bicycle.
A locking mechanism holds the basket in place to prevent it from falling under its own weight.
You will need an M5 screw along with a nut for installation.
The diameter of the bicycle handlebar bridge - 25.3mm.
I used a piece of old bicycle inner tube to mount the handle so that the lock would not rotate.
I printed with ERYONE ASA
nozzle - 0.6
layer - 0.25
walls - 3
infill - 40%
CONCLUSION 💚💚💚If you enjoyed the project please like it.💚💚💚 Post your makes and let me know how it works out for you. If anyone has any comments about them - I'd be happy to listen and improve the models. ☕☕☕ Did my project bring you joy, save you time or solve your problem? Share it with me and make me happy - buy me ko-fi. ☕☕☕ |
****************************************************************************************************************************************************************************************************
Updated 12.05.2025
Updated description.