Dactyl Flex w/ Threaded Tenting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified thumb mount for more customized thumb placement. Addition of a threaded tenting control arm in the base.
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 295
- Wydruki
- 0
- Wyświetlenia
- 3414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a remix of the Dactyl Flex originally created by u/Remus49 on reddit.
The intent is to be able to lock the tenting angle in place with the threaded rod in the bottom of the frame. This also provides place for rubber feet to be applied to reduce movement on the desk.
This is a 5 x 7 layout. The back leg is designed to hold an Elite-C and a TRRS jack similar to this one. The part below the Elite-C platform is intended to organize the wiring.
The files listed as doors are intended to be printed separate and then ‘welded’ shut with a low temp soldering iron.