1 / 2
Children's Stool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A neat children's stool
Roughly 25cm high / 25cm diameter
You'll need:
- 5x Ø16 (15.9)mm wooden rods, cut at about 245mm length
- 2x prints of the provided model (1x top & 1x bottom)
- Some glue
Please print, test and use at your own risk. I am not responsible for any material og personal damage / injury.
Also, please post your makes if you end up printing it 😊
Printing suggestions:
- No need for supports
- Use high strength filament like nylon or perhaps hard TPU (latter not tested)
- (PLA might be too brittle!)
- Use at least 5-6 walls (with 0.6mm nozzle)
- Use at least 5-6 top/bottom layers (@0.2mm layer height)
- Use high infill percentage or print it solid for added strength
- I recommend using concentric bottom surface pattern, but that's optional
Step file added if anyone wants to remix.