MINIRIG 3 | Wallmount / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the MINIRIG 3 (and similar models). It can be mounted to a shelf or board and the speaker slides in.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As i mainly use my MINIRIG 3 sitting in a shelf i wanted to face the speaker forwards to point it towards the room, as this directs the sound better and significantly improves the listening experience. Sound will be much less muddled when directed to your ears, instead of towards the cealing. To save some shelfspace i decided to make a mount, that will screw to the underside of one of the boards.
Usage
Simply screw the mount to a surface and the slide the speaker in. It slides in from the Front.
Design
Designwise i kept it quite simple, but cutout some honeycomb structures, that match the honeycomb cutouts of the speaker-faceplate, to reduce material usage.
Notes on Printing
It will print in one part without the needs of support.
I printed it on a Prusa Mini with 30% Infill (3D-Honecomb), but it feels sturdy enough, so i think the infill could be further decreased.
Additional Things needed
In addition to the Print you would then need 4 Screws of max. 4mm Diameter and appropriate length, to screw the mount to your surface. And of course a MINIRIG 3 speaker or similar ;)