1 / 1
Pontiac Solstice/Saturn Sky Convertible Top Clip — zdjęcie 1

Pontiac Solstice/Saturn Sky Convertible Top Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip that holds lift cable to hinge on flap that opens when the top is raised.

Ocena
0 / 5
Polubienia
6
Pobrania
126
Wydruki
0
Wyświetlenia
368
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This is the clip that goes through the hole in the metal hinge on the silver flap behind the seats that flips up to accommodate the convertible frame when the top is raised on a Pontiac Solstice or Saturn Sky (I assume--I don't own a Sky).  It secures the hooked shaped rod on the end of the flexible lift cable to the hinge so that the flap opens automatically when the top is raised.  It is a major redesign of the https://www.printables.com/model/336483-door-lock-rod-clip by Joe_Snuffy that was designed for the door lock rod of a 2000 Toyota Camry.  In the description for that model, it says the part is listed as interchangeable with the Solstice/Sky convertible top lift cable clip, but it really isn't.  Even if you can force the cone part through the hole without breaking it (not easy to do since it's too big!), the offset between the cone part and the retaining clip is large enough that the rod doesn't reliably stay in the hinge--the bent part of the hook part is too short.

So I did a major overhaul, doing my best to make the model conform to the dimensions of the OEM part (of which I still had one that was mostly unbroken).  The cone was lengthened and narrowed, as was the channel inside the cone; the section between the cone and the base was shortened, the offset between the base of the cone and the retaining clip was removed and the overall length was reduced.

I printed this on a Prusa MK3.9 using a .4 nozzle; I have tried it in PLA and PETG, and PETG is definitely better.  I printed with a layer height of .2, but given the small size of the part and the correspondingly small number of layers, I am going to try printing at reduced layer heights, and may even try a .25 nozzle to see if more layers produces a tougher clip.