1 / 6
Kleinteilelager / stock for small parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Um die leeren Filamentspulen sinnvoll zu verwenden, habe ich dieses Lagersystem konstruiert und erweitere es laufend.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (32)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
Material PLA Layerhöhe 0,2 mm / Infill 15 % / Support bei Bedarf
Mein Tipp: Drucke Teile mit Gewinden immer mit Slicing Toleranz „EXKLUSIV“ (Cura).
My hint: Print threaded parts with slicing tolerance “EXCLUSIV” (Cura).
Zusätzliches Material / additional material: Schraube / screw M4 x 12 mm
Bei der Bohrschablone (Store04) habe ich als Führungsbuchsen Gewindeeinsätze M5 verwendet.
Gutes Gelingen und über ein Like würde ich mich freuen.
Good luck and I would be happy about a like.