Overbed Table Remote and Controller Holder (outdated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remote and controller holder I designed for my overbed table (the side tables you get at hospitals). I was…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a remote and controller holder I designed for my overbed table (the side tables you get at hospitals).
I was in the hospital for a month and in a wheelchair for 3 months a bit ago and I grew to love overbed tables, but hated how I would be screwed if my remotes fell off because I couldn't get up. This is a design for lazy cripples such as myself, where it holds everything you need right at your bedside so you can find it easily and never worry about them falling on the floor ever again!
Keep in mind, this is more of an inspiration design for you to draw or edit your own. Each of the three compartments in this remote holder are custom fitted to my remotes and are not of equal size. I've included the Fusion 360 file so you can edit it to your remotes if you so wish.
Also keep in mind the slot tolerances are tight so you don't need to use screws or anything to hold them in place, just push the arms in with a rock or something heavy.
If you are a fellow cripple, but aren't able to use Fusion 360 and would like me to edit this to your remotes, leave a comment.
UPDATE: This design is now outdated, please see my profile for the current design.
Print Settings
Rafts:
No
Supports:
Yes
.2
Infill:
25
Filament:
3D Hero PLA Black
Category: Organization