Lazy Susan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lazy Susan where the bearing is the "new planetary gear fidget v2" model
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 947
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
My daughter wanted a lazy susan so she could more easily spin cakes when she was decorating them. So, I put this together and it worked pretty well on the first try.
The bearing in the middle is the new planetary gear fidget with the hole in the middle:
https://www.printables.com/model/130765-new-planetary-gear-fitget-v20
So, if you print the top and bottom pieces from this design and one of the planetary gears, you'll be able to assemble it all together. It should be a snug fit between the center of the bearing and the top piece.
When printing, make sure to orient the top part so the flat side is down against the print bed. You shouldn't need any supports for these prints.
Print settings:
Type: PLA
Layer Thickness: 0.2 mm
Perimeters: 3-ish
Top Layers: 4
Bottom Layers: 4
I printed mine on the Creality K1C so any Ender 3 sized print bed should work fine.