Trick puzzle #2 - The Lost Circle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6 piece puzzle. Put all the pieces inside the base frame.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is our new tricky puzzle with just 6 pieces, which have to fit inside the base frame . The pieces are of irregular shapes, so the solution is not so obvious. There are at least 4 (symmetrical) solutions, but there might be more, which is up to you to explore :) If you find the solution(s), you can post pictures/makes up here.
3D printing settings
Print size : approx. 100x60x8mm
Common settings:
- nozzle 0.4mm
- first layer height:0.28mm
- layer height: 0.2mm (you can experiment)
- 3 outer perimeters
- 3 top&bottom solid layers
- infill: adaptive cubic 10-20%
- no brim/raft/supports
- skirt can be used(recommended)
- print speed: based on experience for your printer (default is usually OK)
- filament type:PLA(you can try others also)
Colors in the design images are for presentation purposes only, you can print this puzzle in any color you want.
Filament type: PLA