Nerf LN-01 Inverted Scales - Front Sample Geometry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geometry but sample
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sample geometry of the front-lower portion of the LN-01 Inverted Scales blaster. Use this as a simple template for modelling handguards/rail mounts/etc for the stock front shroud. Model your design along this body, cut this body from your design, and locate screwholes from the hole locations.
Just the left side, but if you're working with this you should know how to mirror parts. Corners and edges are raw and measurements are a little generous in some spots to make up for how inconsistent some of the plastic on the Scales can be.
Hole locations for the forward and middle screwports are included, the stock screws are long enough to add 1.2-1.8mm of material outside the port and still reach the heatsets from the left side. An additional 12mm and 16mm screw can be used on the right side to barely reach the heatsets, but they're not crucial unless you're planning to wrench on the guard.
Forgot to add holes to get to the lower grub screws that suck, I'll add an update for that but I have other plans to make those nonessential.
Like all my CC-BY-NC-SA files, contact me to discuss individual licensing for derivative designs.