Tevo Tarantula Modular X Carriage for Openbuild wheels & Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed / adjusted thingirob's Tevo Tarantula Modular X Car Basic X Carriage to accommodate for the Openbuild wheels…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remixed / adjusted thingirob's Tevo Tarantula Modular X Car Basic X Carriage to accommodate for the Openbuild wheels and Openbuilds Aluminum Extrusion. Wheels fit in the V-Slots better but results in the spacing to be too wide for the wheel bolts & nuts.
IMPORTANT: This was originally posted as I had issues with a Tevo kit. Turns out it was an issue with the stock wheels that came with my 2nd kit. (slightly narrower cut in wheels). You should use the original one posted at thingirob's page: http://www.thingiverse.com/thing:1438795
UNTESTED / UNVERIFIED: Re-labelled this and changed the description. In theory this carriage should fit Openbuilds Wheels and extrusion better there wheels fit deeper in their extrusion.
Added 3mm and 5mm holes for possible add-ons.
Hotend adapters, other required accessories, and instructions available at thingirob's page: http://www.thingiverse.com/thing:1438795
Category: 3D Printer Parts