2022 Shutter Shades Omicron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick print glasses for 2022 New Year's Eve with filament for hinge mechanism.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 285
- Wydruki
- 18
- Wyświetlenia
- 1173
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Quick print glasses for New Year's 2022!
Remix Info
Primary new thing here is the filament hinge inspired by one of the shutter shade remixes. The original openscad design was really good but the snap-fit arms were very fragile. I used blender for some booleans then did manual reinforcement of the hinge portion. Turned out nice.
Source models:
- Original shuttershades design thing:28706 by cmcnamara
- Customizable
openscadthing:1603773 by drjames - 2022 design thing:5170241 by laila26
- Hinge inspired from thing:4703203 by nutshell
Printing
Use small segment of 1.75 mm filament for the hinge; heat with soldering iron or similar to solidify. You can use a 2mm drill bit if the holes are a bit snug. They are modeled at 2mm so it just depends on your printer.
PLA is fine if you are gentle but the hinge is stronger with HTPLA/PETG etc. If you have the textured bed you may want to use that so the surface finish is nicer.