Smart Wallet - Snap-fit Sliding 3D printed wallet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
11/6 - Updated to move the upper right tab from outside to inside. That way if you print the change compartment in a…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 117
- Wydruki
- 3
- Wyświetlenia
- 991
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
11/6 - Updated to move the upper right tab from outside to inside. That way if you print the change compartment in a different color, it won't be interrupted by the tab from the base.
I like the wallet but generally don't want to glue or screw pieces together. I've added three tabs on the base and matching spots on the compartment to lock into. The lid has two tabs that lock into the lever for a good fit. Results will vary based on how tuned your printer is, of course.
This has a slightly thicker lid, based on the f3d files, which I like better.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.20
Infill:
42%
Filament:
Inland ABS Black
Notes:
I used 3 perimeters for good strength.
Category: Household